Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the lenses that go over the front turn signal bulb holders.
These are the lenses that go over the front turn signal bulb holders. Don't over tighten the screws or the lens will crack.
Bus (Type 2): 62-67
No customer reviews for the moment.
Part #: 211801393
This is the most common place for rust on your bus.
Application:Part #: 6411107A
Thru Rod 8" Wider Beam, 48.75" Long, Boxed
Application:Part #: 1115610BK
Billet Dipstick, Black
Application:Part #: 2847104WH
This makes the rear window pop out like the front windows.
Application:Part #: 211809164A
Rear Wheel Well Arch, Right
Application:Part #: 251711629
Heater cables open the flaps in the heater boxes allowing heat into the car.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Part #: 141857681C
Black Formed Plastic Dash Top Cover includes Adhesive (14" Vent)
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 111711141GY
This is the knob on top of the shifter..
Application:Part #: 311501283CH
If a rear axle bearing is bad, you will have excessive play in the rear wheel. CHINA
Application:Part #: 1301049
These straps are a good idea if you have a car with a big engine.The rear strap keeps the bell housing from twisting and the front strap keeps the nose of the transmission from breaking the front mount.We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 6707102CH
These bumpers are made for Baja Bugs.
Application:Part #: 311945223P
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: 111821022P
These new front fenders are not as thick as the original German fenders.
Application:
These are the lenses that go over the front turn signal bulb holders.
