Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This kit contains all of the gaskets needed to rebuild a transmission.
This kit contains all of the gaskets needed to rebuild a transmission. If you don't have the correct transmission jigs, don't try to rebuild the transmission yourself.
Bug (Type 1): 61-79
Bus (Type 2): 59-67
Type 3: 64-72
Ghia: 73-74
Thing: 73-74
Race/Off-Road: 61-
No customer reviews for the moment.
Part #: 113517289A
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 111301289B
This boot goes around the nose cone to seal up the hole where it comes through the pan.
Application:Part #: N122391
Transmission Cradle Bolt Washer
Application:Part #: 1301266
Trans Axle Adapter Kit
Application:Part #: 1311123
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
Application:Part #: 311301343
Sleeve
Application:Part #: 113301264
These rubber mounts hold the transmission in place.
Application:Part #: 111301255A
Transmission Cradle Mount Bracket
Application:Part #: 113301229A
This is the front of the transmission that houses the shift lever.
Application:Part #: 1517122
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock.
Application:Part #: 1301265
These mounts made of urethane never wear-out.
Application:Part #: 1301184
This heavy duty side plate keeps the ring and pinion where it's supposed to be.
Application:Part #: 113301263FA
Rear Transmission Mount, Left or Right good quality sold each
Application:Part #: 1311321
These heavy duty gear keys are rated at twice the strength of stock keys.
Application:Part #: 113301263C
These rubber mounts hold the transmission in place.
Application:Part #: 211301205H
This is the front of the transmission that houses the shift lever.
Application:
This kit contains all of the gaskets needed to rebuild a transmission.
