Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Billet Dipstick, Blue
Billet Dipstick, Blue stock length
Bug (Type 1): All
Bus (Type 2): All
Ghia: All
Thing: All
Offroad/Race: All
No customer reviews for the moment.
Part #: 112950507IDF
Pump Jet Washer for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 113415660A
Turn Signal Cancelling Ring
Application:Part #: 211817567
Gutter, Rear Corner fits both sides
Application:Part #: 111721555E
This cable operates the carburetor(s).
Application:Part #: 113251053
40 HP Stale air Muffler
Application:Part #: 211953141J
These are the lenses that go over the front turn signal bulb holders.
Application:Part #: 113857552LBK
These are the visors you pull down to keep the sun out of your eyes.
Application:Part #: 211703025
Sections that are used for repairing the frame.
Application:Part #: 111945191B
This seal goes between the tail light housing and the body of the car..
Application:Part #: 6511243
These grommets go on the spring plates in the torsion housing of your car.
Application:Part #: 61151062
Engine Oil Accumulator 2 QT capacity
Application:Part #: 211801051HL
This area tends to rust.
Application:Part #: 6711150A
This box is made so you can weld it to a piece of 1 1/2" tubing and mount it to your shifter.
Application:Part #: 151863011
These are the interior panels.
Application:Part #: 311953513D
This switch tells the flasher which way to send the current.
Application:Part #: 113415821
These are the ball joints on the tie rods.
Application: