Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the seals that go around the final drives on an IRS transmission.
These are the seals that go around the final drives on an IRS transmission. To get the inner one out use a screwdriver to poke it through the seal and pry it out.
Bus (Type 2): 68-79
No customer reviews for the moment.
Part #: 211501249
This large soft plug is on the back side of reduction boxes with the 46mm axle nut.
Application:Part #: 111301257
Transmission Horn Bolt
Application:Part #: 251711181
Shift Rod Support Pin for manual Transmissions only
Application:Part #: 002517289A
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 2301241
This steel ball replaces the factory plastic one in Bus trannies 1968-1979.
Application:Part #: 211598600
Lock Plate Kit for Reduction Boxes
Application:Part #: 211599227
Front Transmission Axle Mount
Application:Part #: 211301205H
This is the front of the transmission that houses the shift lever.
Application:Part #: 2311123
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
Application:Part #: 211301297
Front Transmission Mount
Application:Part #: 211301265A
These rubber mounts hold the transmission in place.
Application:Part #: 091311123
This is the main culprit of a noisy transmission.
Application:Part #: 2301265
This steel conversion mount enables you to install a later style full syncro trans in your 1959 and earlier model Bus or Truck..
Application:Part #: 113301155
This is the bushing between the bellhousing of the transmission and the starter.
Application:Part #: 214711171
Rear Shift Rod, Connects front shift rod to transmission
Application:
These are the seals that go around the final drives on an IRS transmission.