Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This washer is larger in diameter than stock so it gives you more surface coverage over the dowel pins.
This washer is larger in diameter than stock so it gives you more surface coverage over the dowel pins. You should use this washer anytime your crank has been 8 doweled. It is very important that you torque the bolt to 250 ft.lb.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 311105273AN
VW Flywheel, 200mm 12 volt 15-1600cc Engines
Application:Part #: 111198455
Main Bearings, 25-36 HP
Application:Part #: 1105251ALBL
Aluminum Stock Crankshaft Pulley Blue
Application:Part #: 1105401B
These connecting rods are longer than stock.
Application:Part #: 111105719A
Rod Bearings .30
Application:Part #: 1105273BR
Lightened 12 lb.
Application:Part #: 111105223
This brass gear goes on the crank to turn the distributor drive shaft.
Application:Part #: 1105169
These cranks are made from stock German core cranks.
Application:Part #: 1903108BLU
EMPI Serpentine Belt System Blue
Application:Part #: 111105245
This seal goes behind the flywheel.
Application:Part #: 111105401CO
Most people don't realize that these are one of the most important parts in the motor.
Application:Part #: 111105281
Flywheel Shim 25-36HP, .24mm (0.01")
Application:Part #: 113105701
These are the shells that go in the rods and ride on the crank.
Application:Part #: 1105255BK
This is a very nice pulley; the numbers are etched in and do not wear off.
Application:Part #: 113105241A
This is a large concave washer that goes on the crank after you have the nose bearing on.
Application:Part #: 111105713A
Rod Bearings .20
Application:
This washer is larger in diameter than stock so it gives you more surface coverage over the dowel pins.
