Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Not our favorite type of piston pin keeps.
Not our favorite type of piston pin keeps. There good for a friday saturday car. The reason we dont like them is after many miles they tend polish the sides of the barrel. Rings will not seat on a polished surface. Sold in sets of 8.
Bug (Type 1): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1198159
These rings are cast iron.
Application:Part #: 1198161A
These rings are cast iron.
Application:Part #: 1198163A
These rings are cast iron.
Application:Part #: N14402140
Some of the most common studs you might need. Stud 8mm x 40mm
Application:Part #: 1101353
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101477BL
These covers look good but have a tendency to leak.
Application:Part #: 1198092BWCH
92mm Pistons & Cylinders Thick Wall set with a 82mm Stroke CHINA
Application:Part #: 1101482
These covers look good but have a tendency to leak.
Application:Part #: 1198092A
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1101399
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101386
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101462KIT
This kit has the correct nuts and washers to hold the heads on the engine..
Application:Part #: 111198057A
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 1198083
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 113101353BCO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1101396
Whether your motor lives or not can depend upon this little shim.
Application:
Not our favorite type of piston pin keeps.
