Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Door Panel Molding Set 6 pcs Convertible Only
Door Panel Molding Set 6 pcs Convertible Only
Bug (Type 1): 56-57
No customer reviews for the moment.
Part #: 6905821
Sealed Momentary Push Button Starter Switch
Application:Part #: NGK B5HS
When replacing these use anti-seize on the threads. NGK B5HS is direct swap for this Bosch W8AC Plug
Application:Part #: 151837493
These are wedge to seal the coners on the front door and quarter windows, where the metal frames meet the scrapers.
Application:Part #: 6115349
If you built your motor out of a type 3 case, you probably notice that once you got it all together you're missing a dipstick tube.
Application:Part #: 113863402
This is a full carpet kit.
Application:Part #: 6609701
This is a hydraulic way to lock your brakes.
Application:Part #: 1129044
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 113953041J
This is the whole unit, lens and bulb holder.
Application:Part #: 6251004CH
A stinger (depending on your motor combo) makes horsepower at 5K RPM and above.
Application:Part #: 1615102
This kit allows you to bolt disc brakes onto your Bug king and link pin or ball joint front end.
Application:Part #: 6251002UCC
Off Road Competition Exhaus, U-Bend Stinger, Ceramic coated 1 1/2"
Application:Part #: 2251005
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 1615109A
Front Caliper Lowered, 5/205
Application:Part #: 1109401SC
SCAT 1.4 Ratio Rocker Assemblies (Pair)
Application:Part #: 021115175
This screen fits in the sump around the pick up tube.
Application:Part #: 211599227
Front Transmission Axle Mount
Application:
Door Panel Molding Set 6 pcs Convertible Only