Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Gas Cap, 100mm with Gasket
Gas Cap, 100mm with Gasket
Bug (Type 1): -55
Bus (Type 2): -55
No customer reviews for the moment.
Part #: T1501616
This replaces your buddy Fred.
Application:Part #: 111598000B
Spring Plate Hardware Kit
Application:Part #: 111707121A
Bumper Bracket w/ light mounting point
Application:Part #: 620107208SS
Replacement Stainless Steel Fuel Tank Brackets 8" Diameter
Application:Part #: 113611373
This cap sits on the top of the brake fluid reservoir filler hole.
Application:Part #: 111301289
Nose Cone Boot
Application:Part #: 025251172G
These are some of the pipes that connect the exhaust system to the muffler..
Application:Part #: 211831056
Front Door Lower Skin, 8.5" High, Right
Application:Part #: 251711629
Heater cables open the flaps in the heater boxes allowing heat into the car.
Application:Part #: 211801403EX
Cargo Floor, outer 11", Left hand side
Application:Part #: 113501831
Long Z-Bar Plastic Sleeve, Each
Application:Part #: 6501205SW
These plates are .250" thick, that means they can handle the abuse of off roading.
Application:Part #: 6611195A
Large Boot For Square Master Cylinder
Application:Part #: 111129921
This is the barrel lock that locks the cable to the carb. It is also used on the Heater Cables
Application:
Gas Cap, 100mm with Gasket