Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Spring Plate Hardware Kit
Spring Plate Hardware Kit
Bug (Type 1): -4/59
Ghia: -4/59
Offroad: -4/59
No customer reviews for the moment.
Part #: 021105291
Endplay Shim .40mm
Application:Part #: 151845121AM
This seal goes around the front window.
Application:Part #: 117877209A
These are all of the parts that we can get our hands on for metal sunroof bugs.
Application:Part #: 1105253RD
This is a crank pulley for an upright motor.
Application:Part #: 131405669
This nut holds the front drum on.
Application:Part #: 113609637
Bracket for Rear Emergency Brake Cable
Application:Part #: 211845110B
To fix the rusted out area of the front window.
Application:Part #: 131405615AGR
These are the front drums that the brake shoes ride on.
Application:Part #: 113609237H
These four shoes or linings are in the front drums and are sold on an exchange basis.
Application:Part #: 111711749A
Heater Lever Bushing Kit, Set of 4
Application:Part #: 311501191REP
Rear snubber repair stud
Application:Part #: 1119517BK
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 2711099PL
Gear shift extensions angle back and add about 5" of length to your stock shifter, which allows you to reach the shifter without leaning forward..
Application:
Spring Plate Hardware Kit