Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This is the main culprit of a noisy transmission.
This is the main culprit of a noisy transmission. The way to check your bearing is to push the clutch in while you are driving. If the noise goes away, then it's the mainshaft bearing. When the clutch is in, the throw-out bearing supports the mainshaft which quiets the mainshaft bearing. If your bearing is bad, we suggest you take your transmission to someone who knows transmissions. Replacing this bearing isn't something the average person can do.
Bug (Type 1): 61-72
Bus (Type 2): 59-67
Type 3: 64-72
Ghia: 60-72
Offroad: 61-
No customer reviews for the moment.
Part #: 113301185A
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: 113517289A
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 113301263
These rubber mounts hold the transmission in place.
Application:Part #: 311301265A
These rubber mounts hold the transmission in place.
Application:Part #: 113517191
Swing Axle Fulcrum Plates
Application:Part #: 211301297
Front Transmission Mount
Application:Part #: 211301265A
These rubber mounts hold the transmission in place.
Application:Part #: 1301049
These straps are a good idea if you have a car with a big engine.The rear strap keeps the bell housing from twisting and the front strap keeps the nose of the transmission from breaking the front mount.We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 113301263FA
Rear Transmission Mount, Left or Right good quality sold each
Application:Part #: 001301209A
Nose Cone Seal Holder
Application:Part #: 113301155
This is the bushing between the bellhousing of the transmission and the starter.
Application:Part #: 111301207
Nose Cone Bushing, Front or Rear, Early
Application:Part #: 211301205H
This is the front of the transmission that houses the shift lever.
Application:Part #: 1301051
High performance street cars or off road cars have been known to crack stock transmission cases.
Application:Part #: 113301229A
This is the front of the transmission that houses the shift lever.
Application:Part #: 113301263C
These rubber mounts hold the transmission in place.
Application: