Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are new Brazilian tanks.
These are new Brazilian tanks. There are four 13mm headed bolts holding it. Make sure you are using German fuel line when putting it back in. The 61-67 tanks take a different cap, which is the same as a 68- one. Caps are separate. For Buses, you will need to have the motor out. Trucks, the tank is in the bed. It is a good idea to buy a neck collar when replacing a tank. NOTE: Disconnect the battery when replacing the tank.
Bug (Type 1): SB,75-
No customer reviews for the moment.
Part #: 131201127
This is a rubber flap that folds out protecting the side of the car when filling it with gas.
Application:Part #: 113201075ABX
These are new Brazilian tanks.
Application:Part #: 111201551C
Gas Cap, 80mm with Gasket
Application:Part #: 803201511E
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
Application:Part #: 113919049C
The sending unit registers the fuel level on the gauge.
Application:Part #: 111201551AL
Locking Gas Cap
Application:Part #: 131298221
This pipe comes out of the bottom of your gas tank.
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 111201621C
Tank to Body Foam Seal
Application:Part #: 133201181A
Fuel Elbow, "T" to Main Exit
Application:Part #: 113201557E
Gas cap gasket
Application:Part #: 311201219A
This hose goes from the filler neck to the tank.
Application:Part #: 111209175B
Grommet for Reserve Lever
Application:Part #: 111209167A
Reserve Lever for Fuel Tap
Application:
These are new Brazilian tanks.