Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Sunroof Cover and Headliner Finishing Washer
Sunroof Cover and Headliner Finishing Washer
Bug (Type 1): 50-55
Bus (Type 2): -67
No customer reviews for the moment.
Part #: N119511
Sunroof Cover and Headliner Finishing Screw
Application:Part #: 211801052HL
This area tends to rust.
Application:Part #: 133805401x
Cross Panel Inner Bracket
Application:Part #: 111831721DBR
Front door seals keep out the wind, rain, dirt and noise.
Application:Part #: 141847491
Rear Door Wedges, Fit both Sides, Convertibles only
Application:Part #: N111531
Valve Adjusting Nut 9mm
Application:Part #: 211611313G
This reservoir is for a 68-72 Bus. The reservoir holds the brake fluid for the brake master cylinder.
Application:Part #: 6415616A
This unit is used when you want to take the steering wheel off in a hurry.
Application:Part #: 113425021
This little shock goes from the center pin arm or pitman arm to the front axle beam or frame.
Application:Part #: 211953165D
Turn Signal Seals, includes inner and outer, Set of 4 for one Bus
Application:Part #: 151857551EWH
These are the visors you pull down to keep the sun out of your eyes.
Application:Part #: 211615107A
Front calipers hold the brake pads that stop the rotor, which in turn stops your vehicle. If you are ordering this without sending your core in first you will need to order the core as well. The core charge will be refunded when we get your core back and it is rebuildable.
Application:Part #: 113905451A
Ignition Cable Holder
Application:Part #: 1721509
EMPI Billet Throttle Pedal Assembly
Application:Part #: 113611373
This cap sits on the top of the brake fluid reservoir filler hole.
Application:Part #: 113412303A
This stop keeps the strut from bottoming out.
Application:
Sunroof Cover and Headliner Finishing Washer