Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Side Panel, Crew Cab Only, Left
Side Panel, Crew Cab Only, Left
Bus (Type 2): 63-65
No customer reviews for the moment.
Part #: 133807000
Bracket kit for the shock style bumper bracket.
Application:Part #: 1129040E
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 315845521CCL
Rear Window Seal Notchback
Application:Part #: 1827705
Just like the front mexican style seal, this seal clips to the deck lid instead of the body..
Application:Part #: 111953161CL
These are the lenses that go over the front turn signal bulb holders.
Application:Part #: 211837396
Goes between the front window frame and the door base on buses up to 1967.
Application:Part #: 6501149108AO
Overboot Only for 930 CV, Each Offroad applications
Application:Part #: T1109309
These clips hold the lifters in place while putting the case halves together.
Application:Part #: 221847105A
New replacement pop out window frames. Mild Steel
Application:Part #: 6501281
Billet Aluminum Bearing Cap, Each
Application:Part #: 6611791
Here are some fitting that might come in handy for your pedal assemblies or steering brakes for off road cars..
Application:Part #: 111809201BX
Front Portion, Side Panel
Application:Part #: 6501500
The brackets can be used to change a swing axle torsion housing into an IRS housing.
Application:Part #: N171211
These are some of the fuses and bulbs that you might need.
Application:Part #: T1105253
This is a light duty puller for removing the crank shaft pulley..
Application: