Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Front Door Sliding Window Fastener Seals, Includes seals for both latches
Front Door Sliding Window Fastener Seals, Includes seals for both latches
Bus (Type 2): 55-67
No customer reviews for the moment.
Part #: 1401061B
2" Narrowed Beam with Ratchet Style Adjusters, Ball Joint
Application:Part #: 141863706
This is a full carpet kit.
Application:Part #: 211707001AM
Complete Front Bumper assembly MINUS mounting brackets, coated in primer
Application:Part #: 113251053AKG
This is the exhaust silencer.
Application:Part #: 141853535A
This is the chrome trim that went on the front and sides of the Ghia to dress it up.
Application:Part #: 6201221
This tap fits most of the aftermarket gas tanks and has a shut off valve on it.
Application:Part #: 1129729RD
These boots are better than stock.
Application:Part #: 111698173A
This is the kit to rebuild the master cylinder.
Application:Part #: 00061
This is a direct replacement coil for the 1983-91 Vanagons.
Application:Part #: 1129609EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 141857551BWH
These are the visors you pull down to keep the sun out of your eyes.
Application:Part #: 111498051AGR
This kit contains the pins, bushings and shims that attach the spindle to the axle beam on king and link pin front ends.
Application:Part #: F1002
These are the glues and oils we use..
Application:Part #: 6117004
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: JC86200
Jaycee Billet 5.5" Crank Pulley for Drag Cars, Red
Application:
Front Door Sliding Window Fastener Seals, Includes seals for both latches