Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Engine lid Mechanism Hardware Kit
Engine lid Mechanism Hardware Kit
Bus (Type 2): -65
No customer reviews for the moment.
Part #: 1601048
Fuchs Chrome, 5x205, 15x4.5"
Application:Part #: 111141177AS
These clips hold the throw-out bearing to the arm.
Application:Part #: 1601053
Fuchs Chrome, 5x130 bolt Pattern, 7"x17"
Application:Part #: JC21040
Jaycee Mag-Plate, 6 Bolt, Silver
Application:Part #: 211813355G
Rear Lower Corner, Left, 250mm (9.8") high
Application:Part #: 111941173A
Parking Light Bulb Holder
Application:Part #: 113845521JAM
This seal is for the rear window.
Application:Part #: 111947111E
A dome light comes in handy when trying to find that missing piece of clothing.
Application:Part #: T1129028
Some carb combo's are tricky to sync, like kadrons that have a stud sticking up.
Application:Part #: 1813113
This polished stainless steel firewall dresses up your engine compartment.
Application:Part #: 1863620B
Center Console Basket
Application:Part #: 2817021
This is a deluxe cover, not a cheap cover.
Application:Part #: 111837277
These wedges align the door so the door latch and striker line up as you close the door.
Application:Part #: 111405691B
This is the cap that goes on the outside of the drum; covering up your bearing.
Application:
Engine lid Mechanism Hardware Kit