Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Splash Pan to Bumper Bracket, Rubber Pad, Set
Splash Pan to Bumper Bracket, Rubber Pad, Set
Bus (Type 2): 59-71
No customer reviews for the moment.
Part #: 6129650473BK
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element.
Application:Part #: 1119533BK
This tin goes behind the crank pulley.
Application:Part #: 111821509MEX
The running boards go between the fenders on each side of the car.
Application:Part #: 111953041A
This is the whole unit, lens and bulb holder.
Application:Part #: 1615115A
Rear Disc Brake Kit W/O E-Brake, 5x130 w/ 14x1.5mm threads or 5x4.75" w/ 12mm threads, IRS
Application:Part #: 211141031L
This disc transfers the power from the motor to the transmission.
Application:Part #: 211843406E
Lower Sliding Door Bracket
Application:Part #: 1109403
These shims are used with the Solid Shaft Rocker Kit.
Application:Part #: 111953042A
This is the whole unit, lens and bulb holder.
Application:Part #: 111809086B
Rear Bumper Mount, Right
Application:Part #: 1109513
Valve seats are used in the big valve heads.
Application:Part #: 311721509
This will replace a worn out pivot for the stock accelerator assembly, to replace this pivot you will have to remove the whole pedal assembly.Make sure you use some white grease on the pin where it mounts to the pedal to insure that it lasts longer..
Application:Part #: T1501616
This replaces your buddy Fred.
Application:Part #: 111827527
This is the plug in the center of the apron.
Application:Part #: 1405075
Replacement Brake Rotor Double Drilled 5x130mm and 5x4.75"
Application:
Splash Pan to Bumper Bracket, Rubber Pad, Set