Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus. If you are running a dog house shroud then you need this wide fan no matter what year the car is. If you don't know what a dog house is, give us a call and we will explain it.
Bug (Type 1): -70
Bus (Type 2): -70
Ghia: -70
Race/Off-Road: -70
No customer reviews for the moment.
Part #: 1119027CH
This small fan shroud came on the 36hp motor.
Application:Part #: 1119027BK
This small fan shroud came on the 36hp motor.
Application:Part #: 1119028CH
This small fan shroud came on the 36hp motor.
Application:Part #: 1119028BK
This small fan shroud came on the 36hp motor.
Application:Part #: 1119431BK
These are the two pieces of tin that attach to a doghouse style fan shroud.
Application:Part #: 1119028BK
This small fan shroud came on the 36hp motor.
Application:Part #: 1119526CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119517BK
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 1119533CH
This tin goes behind the crank pulley.
Application:Part #: 1119303CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 113119317
These are also known as the "forget-me-nots".
Application:Part #: 1119352BK
These three pieces of tin go from the heater boxes to the case.
Application:Part #: 043119352
Heater Channel Tin Lower Right
Application:Part #: 1119023
This spacer kit uses 1 1/4" thick aluminum spacers to close the gap between the fan shroud and the cylinder tins where the sheet metal screw attaches.
Application:Part #: 1119516CH
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 113119031B
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: 043119350B
Heater Channel Tin Upper Right
Application:Part #: 131119357
These are the short pieces that fit under the big cylinder tin towards the crank pulley.
Application:Part #: 1119431CH
These are the two pieces of tin that attach to a doghouse style fan shroud.
Application:Part #: 1119527CH
This tin goes from one piece of cylinder tin to the other.
Application: