Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Rod Bearings .20
Rod Bearings .20
Bug (Type 1): 46-60
Bus (Type 2): 50-59
Ghia: 56-60
No customer reviews for the moment.
Part #: 6119303CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 111801045D
The heater channel carries heat form the heater boxes to the front of the car.
Application:Part #: 151883403
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 1711104
The aftermarket shifters listed here, shorten the shift pattern considerably.
Application:Part #: 111198455
Main Bearings, 25-36 HP
Application:Part #: 651300418
Suspension Limit Straps 18", Pair
Application:Part #: 1129517
Linkage Ball End Bushings, Pair
Application:Part #: 133711717B
Heater cables open the flaps in the heater boxes allowing heat into the car.
Application:Part #: 211955225C
Safari wiper pivots
Application:Part #: 221955425CBR
Windshield wipers definitely nice for when it's raining.
Application:Part #: 071251185A
Tail pipes route the exhaust out of the back of the stock muffler..
Application:Part #: 6707301
These bumpers are made for Baja Bugs.
Application:Part #: 211813355G
Rear Lower Corner, Left, 250mm (9.8") high
Application:Part #: 1411298C
Have you ever fought the stock sway bar clamps? If you're replacing a sway bar, you might think about these clamps because they're much easier to put on.
Application:Part #: 1105255BK
This is a very nice pulley; the numbers are etched in and do not wear off.
Application:Part #: 211707111J
Front Bumper, Primered
Application:
Rod Bearings .20