Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:Also known as a throw-out bearing, this bearing's function is to disengage the clutch.
Also known as a throw-out bearing, this bearing's function is to disengage the clutch. When checking an old bearing, just spin it to see if it sounds dry. We suggest you use a German Sachs bearing as we have seen problems with other brands.
No customer reviews for the moment.
Part #: 111141177AS
These clips hold the throw-out bearing to the arm.
Application:Part #: 113141723
This spring returns the clutch arm.
Application:Part #: 111141031E
This disc transfers the power from the motor to the transmission.
Application:Part #: 111721329
Clutch Pedal Shaft Bracket
Application:Part #: 113141701F
This shaft holds the throw-out bearing in place.
Application:Part #: 111141719HD
Clutch Cable Arm Forged for 20mm Cross shaft
Application:Part #: 113141165B
Also known as a throw-out bearing, this bearing's function is to disengage the clutch.
Application:Part #: 113721305B
This is the shaft that the clutch pedal attaches to.
Application:Part #: 1198026
This kit contains a quality brass bushing, a clutch return spring and retaining clips needed to install the throw-out bearing arm in the transmission.
Application:Part #: 111141723A
Return Spring For Cross Shaft
Application:Part #: 1141024
These are hardend bolts, 10.9 instead of the stock 8.8.
Application:Part #: 111141719F
Clutch Cable Arm Forged for 20mm Cross shaft
Application:Part #: 111721349
Clutch Cable Adjusting Nut, Acorn nut Style, includes backing nut
Application:Part #: 113141701C
This shaft holds the throw-out bearing in place.
Application:Part #: 131141719HD
Clutch Cable Arm Forged for 16mm Cross shaft
Application:Part #: 361141719HD
Clutch Cable Arm Forged for 20mm Cross shaft
Application:Part #: 211141025A
Clutch Cover, 12 volt 200mm, 9 spring
Application: