Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are a nice unit and much better for off road cars than the cast aluminum breather box. Great for sand cars.
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1115457BK
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Black
Application:Part #: N110062
Some of the more common nuts you might need..
Application:Part #: 6115467E
These are a nice unit and much better for off road cars than the cast aluminum breather box.
Application:Part #: 1117007SS
This is the high-temp/pressure hose wrapped with braided stainless steel.
Application:Part #: 1117109
This block off plate is made to loop the oil back into the case in place of the stock oil cooler.
Application:Part #: 111115175B
This screen fits in the sump around the pick up tube.
Application:Part #: 6115466
This is the best breather system for off-road cars.
Application:Part #: 1117101ALF
These fittings are used for the stainless steel hose.
Application:Part #: 111115131B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1115449BK
Replacement Oil Cap Billet Black
Application:Part #: 1117024FAN
This is the same as the mesa cooler but with a fan mounted to it.
Application:Part #: 1117110
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
Application:Part #: 111115495
This is more of a bolt than a nut.
Application:Part #: 1117103
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115351
This is the last oil filter you will ever buy.
Application:Part #: 1115458
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:
