Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Step stud
This is the step stud that comes out of the head that bolts the heater box on.
No customer reviews for the moment.
Part #: 111837657A
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: 211945119B
This is the lens that you see on the side of the bus in the front and the rear.
Application:Part #: 211955325D
Wiper Linkage, LEFT
Application:Part #: 2711100
Gear shift extensions angle back and add about 5" of length to your stock shifter, which allows you to reach the shifter without leaning forward..
Application:Part #: 2847104WH
This makes the rear window pop out like the front windows.
Application:Part #: 113611724B
These are the metal brake lines found throughout the car.
Application:Part #: 115875219
Rag Top Handle (Interior)
Application:Part #: 211845371E
Rear side window glass with out vent Wing.
Application:Bus (Type 2); 68-79
Part #: 2498211C
Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard. These spindles will give you the stock ride and give you that lowered stance. They are sold on an exchange basis and come with new king pins. They do NOT come with link pins, so look at yours to see if you need new ones. Most of the time you do not need new ones...
Application:Part #: 113721001
Pedal Assembly Bushing Kit
Application:Part #: 111899117
Body Pad (2), Under Rear Seat
Application:Part #: 661101
Single handle Steering Brake Angled 3/4" bore
Application:Part #: 3251005
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 070109345
These are the seals that go around the push rod tubes.
Application:Part #: 113698700
Steel Brake Line Kit (6 Pieces)
Application:Part #: 1119528BK
This tin goes from one piece of cylinder tin to the other.
Application:
Step stud