Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Side Weld in Tabs For Rear Safari
Bus (Type 2); 55-79
These are the tabs that weld onto the rear hatch for your rear Safari window. If your buying a kit they come with these tabs and no need to buy more. If you got a rear Safari kit used then you might be needing these. Sold in pairs.
No customer reviews for the moment.
Part #: 211405641D
These are the inner bearing seals on the drums or rotors.
Application:Part #: 111199102
This nut came on all dual relief cases.
Application:Part #: 1615100G
Link Pin Bolt-On Disc Brake Kit, Double Drilled 5x130/5x4.75"
Application:Part #: 211405521B
Kits contain the pins, bearings and shims which attach the spindle on king and link front ends to the axle beam.
Application:Part #: 6957352A
These lights let you know what's on or happening with various parts of your car..
Application:Part #: 211809101C
This is what everyone cut out in the 60's.
Application:Part #: 1847571B
Bug Safari Dash Tabs
Application:Type 1 (Bug); 58-64
Part #: 6611195
Small Boot For Square Master Cylinder
Application:Part #: 6900005
These battery mounts are to give the battery a place to sit on tube chassis.
Application:Part #: 04138
These are the parts found in the distributor.
Application:Part #: 111971118
The electrical harness runs everything on the car.
Application:Part #: 211711341A
Emergency Brake Lever Pin
Application:Part #: 111899115
Body Pad (2), Lower, Body to Front Beam
Application:Part #: 091141701
This shaft holds the throw-out bearing in place.
Application:Part #: N114072
Fender Weld Nuts, 8mm, 10 pieces Late Style
Application:
Side Weld in Tabs For Rear Safari
