Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
IDF air cleaner shield.
Offroad; All
This shield is made to keep water and mud out of your carb. If you have a Baja or a street car you might have clearance problems on the 3 and 4 side to the firewall. They are made to leave on as air will come up from the bottom side. 4 inches tall. Sold each
No customer reviews for the moment.
Part #: 113805591B
Front Apron Super Beetle only
Application:Part #: 111823345
Hood Stay Bolt (2 required) also used for hood hinge pivot bolt in various years (62-77 standard) (71-72 super)
Application:Part #: 113698002A
Brake Spring Kit
Application:Part #: 111919051
Fuel Tank Sending Unit
Application:Part #: 111857131
Glove box latch
Application:Part #: 113853325B
These chrome moldings for American style seals go around the windows and are just for looks.
Application:Part #: 6823501
These fasteners take some time to put in, but they're worth the effort.
Application:Part #: N203571F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Part #: 251845121CA
This seal goes around the front window.
Application:Part #: 221847081D
These are the latches that hold the popout frame out.
Application:Part #: 1101393
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 113857111
This plastic ring goes around the dash for the glove box.
Application:Part #: 6857652
Billet J-Hook Support Brackets (Set of 5) for 1.5" Tubing
Application:Part #: 113517191
Swing Axle Fulcrum Plates
Application:Part #: 1401021B
This is the way to go if you want an adjustable front beam.
Application:Part #: 1707103
This bumper is perfect for 1968-73 cars when the turn signals have been shaved off the front fenders.
Application:
IDF air cleaner shield.