Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This pair of aluminum end castings are for use with a center section manifold.
This pair of aluminum end castings are for use with a center section manifold. They're available for single port or dual port heads. They come with boots and intake gaskets.
Bug (Type 1): 1600
Bus (Type 2): 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1129709
This pair of aluminum end castings are for use with a center section manifold.
Application:Part #: 043129617A
Air Intake Boot for Fuel Injection
Application:Part #: 1129600
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 1129025
This is a new aftermarket UNIVERSAL intake manifold for Dual Port Engines. You can use a 30 Pict1 or 34Pict3 Carburetor. We have had major icing problems with this part and prefer stock manifolds.
Application:Part #: 1129608
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1127106ALM
This is stainless steel braided fuel line.
Application:Part #: 1129606EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1129729
These boots can be put on without taking the intake manifold apart and should be used only in an emergency.
Application:Part #: 1129607EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 113129729BS
These boots connect the intake manifold with the end casting on a stock dual port 1600cc engine. Two are required boots are sold individually.
Application:Part #: VCP18
This is a rubber plug that is used to plug off vacuum.
Application:Part #: 111127541
8mm Fuel Line Union Nut
Application:Part #: 113127521AWG
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 111127531
8mm Fuel Line Ferrule
Application:Part #: 1129605EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 111127521A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:
This pair of aluminum end castings are for use with a center section manifold.
