Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank. It has two 90 degree bends where it comes out of the rear tin. It's function is to keep the fuel away from the heater box. Most people don't replace this, but should. We see a lot of engine fires because of a bad metal line or a flex fuel line run all the way to the pump. Note: Make sure you have a grommet in the rear tin so that the tin doesn't rub a hole in the line. This cheaper line does NOT fit at well at all and you will need to re-bend it. If you want one that fits right use 113127521AWG. Those are re-bent.
No customer reviews for the moment.
Part #: 1127022
This block off is used in conjunction with electric fuel pumps and mounts in place of the manual fuel pump.
Application:Part #: 113127313
These stock pumps pump fuel into the carburetor.
Application:Part #: 1129602EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1129701W
EMPI Deluxe Dual HPMX or IDF Manifold kit
Application:Part #: 1129608EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 113129709D
Dual Port Manifold End Casting - Left
Application:Part #: 113127307A
This rod drives the fuel pump.
Application:Part #: 1127105ALM
This is stainless steel braided fuel line.
Application:Part #: 1127101ALF
This is stainless steel braided fuel line.
Application:Part #: 1129729
These boots can be put on without taking the intake manifold apart and should be used only in an emergency.
Application:Part #: 043133241
These two boots connect the intake manifold with the end casting on a stock dual port 1600cc engine.
Application:Part #: 1129717
These gaskets are for upright dual port engines.
Application:Part #: 311133261A
These o-rings should be replaced whenever you replace a fuel injector, or if they are old and cracked.
Application:Part #: VCP18
This is a rubber plug that is used to plug off vacuum.
Application:Part #: 1129700
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1129604
This air cleaner takes the place of a stock air cleaner.
Application:
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
