Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These o-rings should be replaced whenever you replace a fuel injector, or if they are old and cracked. Four small and four large seals are required per motor.
Bug (Type 1): 75-79
Bus (Type 2): 75-84
Type 3: 68-73
No customer reviews for the moment.
Part #: 113129717LRG
Dual Port Gaskets without Pin Holes
Application:Part #: 1127110ALM
This is stainless steel braided fuel line.
Application:Part #: 1129606EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1127027
This regulator adjusts the fuel pressure to you carburator.
Application:Part #: 1129717
These gaskets are for upright dual port engines.
Application:Part #: 1129601
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 1129601HD
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 113127311
These stock pumps pump fuel into the carburetor.
Application:Part #: 111127541
8mm Fuel Line Union Nut
Application:Part #: 1127108ALF
This is stainless steel braided fuel line.
Application:Part #: 311129707
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 311133263
Fuel injection seal large
Application:Part #: 1129610EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 111127511A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 113129729BS
These boots connect the intake manifold with the end casting on a stock dual port 1600cc engine. Two are required boots are sold individually.
Application:Part #: 113127303
The fuel pump sits on this little stand and it's also the guide for the push rod.
Application:
