Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These stock pumps pump fuel into the carburetor. We prefer the 025B pump over all the other pumps; however it is no longer avaible. The next best is the 025D. We don't recommend aftermarket electric pumps, because if you get in an accident and there is a fire, the pump continues to feed it. Note: Before installation, put a dab of grease on the foot that the rod rides on.
Bug (Type 1): 75-79
Bus (Type 2): 75-92
No customer reviews for the moment.
Part #: 111127521A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 043133247
Air Distribution Fitting
Application:Part #: 1129601HD6
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 113127025G
These stock pumps pump fuel into the carburetor.
Application:Part #: 1129602
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 311133261A
These o-rings should be replaced whenever you replace a fuel injector, or if they are old and cracked.
Application:Part #: 1129608EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1129701
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1129729
These boots can be put on without taking the intake manifold apart and should be used only in an emergency.
Application:Part #: 1129708
This pair of aluminum end castings are for use with a center section manifold.
Application:Part #: 1127112
This regulator adjusts the fuel pressure to you carburator.
Application:Part #: 113127307A
This rod drives the fuel pump.
Application:Part #: 113127307
This rod drives the fuel pump.
Application:Part #: 111198555
This kit allows you to rebuild your square top or 40hp fuel pump.
Application:Part #: 111127531
8mm Fuel Line Ferrule
Application:Part #: 1129717
These gaskets are for upright dual port engines.
Application:
