Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a good, cheap dual carburetor kit for a 1600cc motor.
This is a good, cheap dual carburetor kit for a 1600cc motor. What we don't like is the throttle bushings wear out over time and you need to change the fuel hose it comes with to a German hose. If you need different jet see carburetor parts. They take stock solex idle jets and main jets.
Bug (Type 1): 1500-1600
Bus (Type 2): 1500-1600
Ghia: 1500-1600
Thing: 1500-1600
Off-Road: 1500-1600
No customer reviews for the moment.
Part #: 1127100
Hose Clamp for 5mm hose
Application:Part #: 113127311
These stock pumps pump fuel into the carburetor.
Application:Part #: 1129610
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1127112
This regulator adjusts the fuel pressure to you carburator.
Application:Part #: 111127591
Fuel Line Grommet 6mm
Application:Part #: 1129701W
EMPI Deluxe Dual HPMX or IDF Manifold kit
Application:Part #: 113129701K
Single Port, Intake Manifold, 1500-1600cc, 30mm Base
Application:Part #: 113127511A
Fuel Line, Metal, 6mm Pump to Carburetor
Application:Part #: 1127109ALM
This is stainless steel braided fuel line.
Application:Part #: 111127591A
Fuel Line Grommet 8mm
Application:Part #: 1127022BL
Billet Fuel Pump Block off, Blue
Application:Part #: VCP18
This is a rubber plug that is used to plug off vacuum.
Application:Part #: 1129710
EMPI Single HPMX/IDF Manifold for Type 1 engines
Application:Part #: 043133241
These two boots connect the intake manifold with the end casting on a stock dual port 1600cc engine.
Application:Part #: 61316
These stock pumps pump fuel into the carburetor.
Application:Part #: 311129707
These are the gaskets used between the intake manifold and the cylinder head.
Application:
This is a good, cheap dual carburetor kit for a 1600cc motor.
