Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This is a rubber plug that is used to plug off vacuum.
This is a rubber plug that is used to plug off vacuum. We use the 12mm on stock dog house fan shrouds, to block off where the hose would go to the charcoal canister. It can also be used if you want to block off where the vacuum line came off the stock intake manifold for the power assist on buses. The smaller plugs are usually used on the carb to plug off unused vacuum ports.
No customer reviews for the moment.
Part #: 1129601
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 1129729BKKIT
Dual Port Installation Kit utilizing Black Urethane Boots
Application:Part #: 113127307A
This rod drives the fuel pump.
Application:Part #: 1129608
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1127105ALM
This is stainless steel braided fuel line.
Application:Part #: 1129612
Single Air Cleaner
Application:Part #: 1129607
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1127103ALM
This is stainless steel braided fuel line.
Application:Part #: 111127141
Fuel Pump Diaphragm 25-36 HP
Application:Part #: N138231
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 1127112
This regulator adjusts the fuel pressure to you carburator.
Application:Part #: 1129617
This air cleaner is a sealed unit; the top and bottom do not come off, but they're washable.
Application:Part #: 1129729
These boots can be put on without taking the intake manifold apart and should be used only in an emergency.
Application:Part #: 311133261A
These o-rings should be replaced whenever you replace a fuel injector, or if they are old and cracked.
Application:Part #: 113129709D
Dual Port Manifold End Casting - Left
Application:Part #: 1129607EL
This air cleaner takes the place of a stock air cleaner.
Application: