Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This makes the rear window pop out like the front windows.
This makes the rear window pop out like the front windows. There are two tabs that will have to be welded in and the rest of the kit screws in. We don't recommend you open
this window unless you have the front windows open as it will suck exhaust into the bus. They come powder coated off-white or polished stainless steel.
The Frame measures 32 5/8" Wide x 14 3/4" Tall
Bus (Type 2): 55-63
No customer reviews for the moment.
Part #: 211845124B
Safari Inner Seal (Shim Roll) per foot. Each Front Safari window takes 7 feet or 14 feet per pair.
Application:Part #: N109061
This is a list of the most common screws you might need. We use these on the Bus safari frame joining tab.
Application:Part #: 211847516
This latch screws onto the safari window latching it closed.
Application:Part #: 2847521D
This seal goes on the body of the bus, that the safari window closes against.
Application:Part #: 2847574
Latch for Small and Medium Rear Safari Windows
Application:Part #: 211847571B
Front Safari Dash Tab Short
Application:Part #: 2847521A
This seal goes on the body of the bus, that the safari window closes against.
Application:Part #: 2847491HSK
These kits are designed to replace the straight slide supports on Bus front and small rear safari windows.
Application:Part #: 211955233
Sleeve for One Eyed Duck
Application:Part #: 2847100HW
Front Safari Installation Hardware kit only
Application:Part #: 211847515
This latch screws onto the safari window latching it closed.
Application:Part #: 261847231
This is the wiper holder that mounts in the middle of buses that have safari windows.
Application:Part #: 211845123B
WG Safari Inner Seal (Vinyl) per foot. Each Front Safari window takes 7 feet or 14 feet per pair.
Application:Part #: N160601BIL
Billet Safari Slide Knobs. They come in sets of 4
Application: