Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
If you have a lot of play in the steering don't just assume the steering box is bad.******Due to the lack of cores that we have to rebuild, we require the core to be sent up front before we will send out a rebuilt box***
If you have a lot of play in the steering don't just assume the steering box is bad. With the bus on the ground, have someone turn the steering wheel back and forth, and look at the shaft that comes out of the steering box to see if it is moving sideways before it spins. If it moves it's bad. ***Before ordering a steering box, check to make sure that you either have a ZF or an ATE steering box. TRW steering boxes can not be rebuilt and will not be accepted as a core.******Due to the lack of cores that we have to rebuild, we require the core to be sent up front before we will send out a rebuilt box***
All steering box cores must be sent first, before we can send you a rebuilt one. Our stock on these are so low that we cannot chance people not sending cores back. Your box must be a “ZF” or “ATE” box for 55-67. We cannot use any other cores, so please check that you have a rebuildable box before sending. We will call you after we have received and reviewed your core. Most of the cores we receive are rebuildable, however, there are a few that are not able to be rebuilt. We will let you know when we call you whether yours are rebuildable or not, and figure out the next step.
With Each Rebuilt Steering box we Recommend purchasing One 16oz bottle of Power Punch Oil Supplement Part # F1415049!
Some reasons why your item might not be accepted:
- Bent steering shaft,
- Completely rusted, won’t turn
- Peg & worm destroyed
Bus (Type 2): 55-67
No customer reviews for the moment.
Part #: 211415617
This rubber seal goes around the steering column to seal off air coming through the floor.
Application:Part #: 211415639
This rubber collar goes around the bracket that holds the steering column.
Application:Part #: 211415637A
Upper Steering Column Bushing, black Rubber
Application:Part #: 211415639
This rubber collar goes around the bracket that holds the steering column.
Application:Part #: 2415057
EMPI Polished Billet Aluminum Steering Wheel Boss Kit
Application:Part #: 311415812C
These are the ball joints on the tie rods.
Application:Part #: 113951501B
Horn Button, Castle on Face
Application:Part #: 211415417
This is a rubber "donut" that connects the steering shaft to the steering box.
Application:Part #: 141561410A
Beautiful Classic Wood with Polished chrome Spokes.
Application:Part #: 211415802F
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 141561410KT
Beautiful Classic Wood Thin Grip with Polished chrome Spokes With Hub
Application:Part #: 211415802D
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: N125381
Cotter Pin, Steering Box to Pitman Arm
Application:Part #: 2415058
EMPI Polished Billet Aluminum Steering Wheel Boss Kit
Application:Part #: 1415811
This kit allows you to drill out your tie rod end holes and flip your tie rod end over, giving you a better tie rod angle.
Application:Part #: 211415049HWG
If you have a lot of play in the steering don't just assume the steering box is bad.
Application:Part #: 211415801F
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 311415811C
These are the ball joints on the tie rods.
Application:Part #: 113425117
It is for the steering damper. If yours is bad then the steering damper will be sloppy, rendering the damper useless. It will need to be pressed out and pressed in.
Application:
If you have a lot of play in the steering don't just assume the steering box is bad.******Due to the lack of cores that we have to rebuild, we require the core to be sent up front before we will send out a rebuilt box***