Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This seal is for the rear window. Note: For instructions see FRONT WINDOW SEAL. American style has groove for chrome. This is for a CONVERTIBLE ONLY.
Bug (Type 1): 75 1/2-79
No customer reviews for the moment.
Part #: 151837507
These are the replacement bushings for the Convertible window regulator.
Application:Part #: 113845321ACL
This seal goes around the side window that is stationary (does not have a frame).
Application:Part #: 113853329
Outside Scraper Clip
Application:Part #: 151871357
These are the rear quarter wedges for your convertible..
Application:Part #: 1898123
These window seals don't have the groove in them for the chrome trim, giving the car the Cal Look.
Application:Part #: 111837501D
Window Regulator, Left
Application:Part #: 151845121BAM
This seal goes around the front window.
Application:Part #: 113837631
Bracket, Top of Wing Vent Window, Left
Application:Part #: 113853322AGR
The front door window rolls up and down between these two rubber seals.
Application:Part #: 113845521BAM
This seal is for the rear window.
Application:Part #: 1837433
This kit comes with everthing you need to eliminate your vent window, tempered glass, felt window channels, inner and outer snap in scrappers.
Application:Part #: 151847321A
Quarter Window Hinge, Left, Convertibles only
Application:Part #: 151847351B
These are wedge to seal the coners on the front door and quarter windows, where the metal frames meet the scrapers.
Application:Part #: 151847571A
Glass to Sash Rubber for Rear Quarter window, Convertible
Application:Part #: 111837421
Clip, holds rear metal felt run channel in place (2 required per car)
Application:Part #: 1837475A
This kit comes with everthing you need to eliminate your vent window, tempered glass, felt window channels, inner and outer snap in scrappers.
Application: