Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These seals are for the side popout windows.
These seals are for the side popout windows. To replace the inner seal between the frame and the glass takes a lot of work. The frame will need to be split and the little screws that hold the frame together are usually rusted in. To replace the outer seal, start one edge of the seal and then work the other edge in with a small screwdriver.
Bug (Type 1): 53-64
Off-Road: 53-64
No customer reviews for the moment.
Part #: 151837475DRO
The front door window rolls up and down between these two rubber seals.
Application:Part #: 113837409A
Vent Window Division Bar, Left
Application:Part #: 151837473
The front door window rolls up and down between these two rubber seals.
Application:Part #: 111837629
This seal goes on the back side of the front door vent wing.
Application:Part #: 151871357C
This seals the top to the window(s).
Application:Part #: 113847135A
These seals are for the side popout windows.
Application:Part #: 151847341A
This seal goes between the rear quarter window and the front door side window on a convertible.This is very important if you want to keep your window in..
Application:Part #: 151847476BRO
These scrapers found on convertibles are for the rear quarter windows.
Application:Part #: 151837633A
Vent Wind Upper Pivot Screw, Convertible
Application:Part #: 113845321CL
This seal goes around the side window that is stationary (does not have a frame).
Application:Part #: 111837421
Clip, holds rear metal felt run channel in place (2 required per car)
Application:Part #: 151847365A
Window Sash for Rear Quarter Window, Left, Convertible
Application:Part #: 113845321FCL
This seal goes around the side window that is stationary (does not have a frame).
Application:Part #: 113845121JCL
This seal goes around the front window.
Application:Part #: 151837471
This is a rubber seal that goes into the door, sealing the vent wing frame to the door.
Application:Part #: 151871410
These seal the base of the rear quarter windows on early convertibles..
Application:
These seals are for the side popout windows.