Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are two of the different types of exhaust nuts.
These are two of the different types of exhaust nuts. If you are running a larger tubing size on your exhaust, then we suggest using the 12mm or the 11mm nuts. The copper ones don't back off, but we find when you want to take them off, they tend to pull the stud so we like the steel ones better.
Bug (Type 1): 36hp-1600
Bus (Type 2): 36hp-1600
Type 3: 36hp-1600
Ghia: 36hp-1600
Thing: 36hp-1600
Race/Off-Road: 36hp-1600
No customer reviews for the moment.
Part #: 1251202FL
This is the 3-bolt gasket that goes between the muffler and the header.
Application:Part #: 1256092
Also called J-tubes, these tubes fit most header systems and replace the stock heater boxes, so you will lose your heat and defroster..
Application:Part #: 1251210S
6 Point 8mm-1.25 thread Engine Nuts, Uses 10mm Wrench
Application:Part #: 1251009SS
EMPI Stainless Steel PHAT Boy Muffler
Application:Part #: 1251200
This kit comes with four flanges, two for the heater boxes and two for the header. Sold EACH, 2 required.
Application:Part #: 1256091
J-Tubes, replace stock heater boxes, eliminates heater and saves weight, come with gaskets, sold in pairs
Application:Part #: 1251203
This is the 3-bolt gasket that goes between the muffler and the header.
Application:Part #: 1251166
This is a reproduction of an accesory that was offered by the dealer.
Application:Part #: 111298051GR
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 1251199
This is the 3-bolt gasket that goes between the muffler and the header.
Application:Part #: 1251211B
Brass Exhaust Nuts 8mm-1.25 thread, 11mm Head (100 per kit)
Application:Part #: 1251005LF
Large 3 bolt flange Single Quiet pack Muffler
Application:Part #: N110085
Some of the more common nuts you might need..
Application:Part #: 1251261
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 1251262C
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 1251006
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:
These are two of the different types of exhaust nuts.
