Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is what gets smashed up first in an accident.
This is what gets smashed up first in an accident. For Buses and Bugs up to 1967, American style bumpers have tubing on the top that tie into the bumper guards. The 1967 and earlier Euro blades have no holes for tubing. Bumpers for Bugs 1968 and later are blade style only.
Bug (Type 1): 68-73 Rear
No customer reviews for the moment.
Part #: 113707191C
This special chrome bolt has a round head on it.
Application:Part #: 113707334A
These brackets hold the bumpers on.
Application:Part #: 113707333A
These brackets hold the bumpers on.
Application:Part #: 111707197B
These grommets go on the fenders or the body where the bumper brackets go through..
Application:Part #: 415707401
This is the strip of rubber that goes on the center of the bumper..
Application:Part #: 113707156
Chrome Bumper Guards with Impact Strip
Application:Part #: 113707156A
Chrome Bumper Guards without Impact Strip
Application:Part #: 133807346
these plastic caps mount on the ends of the later year bumpers..
Application:Part #: 111707111
Front Bumper Bar, Bare Steel
Application:Part #: 133707193
These grommets go on the fenders or the body where the bumper brackets go through..
Application:Part #: 1707135APL
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 111707121A
Bumper Bracket w/ light mounting point
Application:Part #: 113707134A
These brackets hold the bumpers on.
Application:Part #: 1707103
This bumper is perfect for 1968-73 cars when the turn signals have been shaved off the front fenders.
Application:Part #: 133807331A
Left rear bumper shock
Application:Part #: 113827903
This bracket holds the license plate to the car.
Application:Part #: 111707121
These are the brackets that hold the bumpers on.
Application:Part #: 6707105
Chrome King Pin Front Bumper
Application:Part #: 113707191B
This special chrome bolt has a round head on it.
Application:Part #: 113707311B
This is what gets smashed up first in an accident.
Application:Part #: 113707391WW
Bumper Support
Application:Part #: 133807345
these plastic caps mount on the ends of the later year bumpers..
Application:Part #: 1707102
Stainless Steel Front Bumper Overrider Set
Application:
This is what gets smashed up first in an accident.
