Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
We only offer brand new pressure plates because so-called rebuilt pressure plates never quite come up to factory pressure specs.
We only offer brand new pressure plates because so-called rebuilt pressure plates never quite come up to factory pressure specs. We use a 1700 lbs pressure plate on most big-engine daily drivers. Heavier ones should only be used on your "Friday-Saturday night, race" car.
Bug (Type 1): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 111721305C
This is the shaft that the clutch pedal attaches to.
Application:Part #: 111141719HD
Clutch Cable Arm Forged for 20mm Cross shaft
Application:Part #: 113141701E
This shaft holds the throw-out bearing in place.
Application:Part #: 1141701B
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 113141723
This spring returns the clutch arm.
Application:Part #: 113198026
This kit contains a bushing, a clutch return spring and the retaining clips to install the throw-out bearing shaft in the transmission.
Application:Part #: 131141719HD
Clutch Cable Arm Forged for 16mm Cross shaft
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1141028
Kennedy Stage 4, 3000 LB Pressure Plate
Application:Part #: 311141031D
This disc transfers the power from the motor to the transmission.
Application:Part #: 131141719HDL
Clutch Cable Arm Forged for 16mm Cross shaft
Application:Part #: 211141025A
Clutch Cover, 12 volt 200mm, 9 spring
Application:Part #: 1198026A
This kit contains a quality urethane bushing, a clutch return spring and retaining clips needed to install the throw-out bearing arm in the transmission.
Application:Part #: 1141031
These clutch disc do not slip.
Application:Part #: 361141719HD
Clutch Cable Arm Forged for 20mm Cross shaft
Application:Part #: 311141031B
This disc transfers the power from the motor to the transmission.
Application:
We only offer brand new pressure plates because so-called rebuilt pressure plates never quite come up to factory pressure specs.
