Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Guide Sleeve
This is the throw out bearing guide sleeve that bolts around the main shaft. This is what the bearing rides on. It is only used on 1971 on transmissions. They do not go bad normally.
No customer reviews for the moment.
Part #: 113141701F
This shaft holds the throw-out bearing in place.
Application:Part #: 1141025
Heavy Duty Clutch Pressure Plate - 1700lbs. This is made by KEP
Application:Part #: 111141719HD
Clutch Cable Arm Forged for 20mm Cross shaft
Application:Part #: N102401
This is a list of the most common bolts used on a car..
Application:Part #: 1141033
Cushion Clutch Disc - 200mm
Application:Part #: 211141025D
The clutch cover is also known as a pressure plate.
Application:Part #: 111141031E
This disc transfers the power from the motor to the transmission.
Application:Part #: 113141723
This spring returns the clutch arm.
Application:Part #: 1141030
200mm 6 puck Clutch Disc
Application:Part #: 1141025CH
HD Pressure Plate 1700 lbs China
Application:Part #: 1141701B
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 111141177AS
These clips hold the throw-out bearing to the arm.
Application:Part #: 1141027
Kennedy Stage 3 Pressure plate 2600 LB
Application:Part #: 113141701C
This shaft holds the throw-out bearing in place.
Application:Part #: 1141031
These clutch disc do not slip.
Application:Part #: 111141719F
Clutch Cable Arm Forged for 20mm Cross shaft
Application:
Guide Sleeve