Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This disc transfers the power from the motor to the transmission.
This disc transfers the power from the motor to the transmission. To check an old clutch disc, use a 7mm wrench and try to put the open end over the thickness of the disc. If the wrench goes on, you should think about replacing the disc. There are basically two types of discs, ridged and one with springs. The spring type has a little give before it engages, reducing the shock on the transmission. The ridged discs are good for dirt cars or someone who wants to race at the drag strip.
No customer reviews for the moment.
Part #: 111721349
Clutch Cable Adjusting Nut, Acorn nut Style, includes backing nut
Application:Part #: 1141025
Heavy Duty Clutch Pressure Plate - 1700lbs. This is made by KEP
Application:Part #: 113141701E
This shaft holds the throw-out bearing in place.
Application:Part #: 1141025CH
HD Pressure Plate 1700 lbs China
Application:Part #: 111141031F
This disc transfers the power from the motor to the transmission.
Application:Part #: 1141024
These are hardend bolts, 10.9 instead of the stock 8.8.
Application:Part #: 311141025E
The clutch cover is also known as a pressure plate.
Application:Part #: 111141723A
Return Spring For Cross Shaft
Application:Part #: 361141719HD
Clutch Cable Arm Forged for 20mm Cross shaft
Application:Part #: 1141701B
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 113198026
This kit contains a bushing, a clutch return spring and the retaining clips to install the throw-out bearing shaft in the transmission.
Application:Part #: 113141723
This spring returns the clutch arm.
Application:Part #: 211141025A
Clutch Cover, 12 volt 200mm, 9 spring
Application:Part #: 111141177AS
These clips hold the throw-out bearing to the arm.
Application:Part #: 131141719HD
Clutch Cable Arm Forged for 16mm Cross shaft
Application:Part #: N102401
This is a list of the most common bolts used on a car..
Application:
This disc transfers the power from the motor to the transmission.