Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These flywheels have been reconditioned and are sold on an exchange basis. Currently out of stock of cores. MUST send core before we can ship flywheel.
These flywheels have been reconditioned and are sold on an exchange basis. If your flywheel has a groove where the clutch rides, it's a good idea to replace it. Read CRANKSHAFT ENDPLAY SHIMS for important instructions on flywheel installation.
Bug (Type 1): 40hp-1300
Bus (Type 2): 40hp-1300
Type 3: 40hp-1300
Ghia: 40hp-1300
No customer reviews for the moment.
Part #: 311105273AN
VW Flywheel, 200mm 12 volt 15-1600cc Engines
Application:Part #: 1105401A
These connecting rods are longer than stock.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 111105707A
Rod Bearings .10
Application:Part #: 111105263A
The bolt that holds the crankshaft pulley on.
Application:Part #: 111198511OS2
Main Bearing Set 1200-1600
Application:Part #: 1105401B
These connecting rods are longer than stock.
Application:Part #: 1105273CH
Lightened 12 lb.
Application:Part #: 111105233
This gear matches up with the brass gear that is on the crank.
Application:Part #: 1903108PL
EMPI Serpentine Belt System
Application:Part #: 1105258
This is a stock, zinc-plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
Application:Part #: 1105255BK
This is a very nice pulley; the numbers are etched in and do not wear off.
Application:Part #: 111105287
Flywheel Shim 25-36HP, .34mm (0.0135")
Application:Part #: 111105259
The bolt and washer that holds the crankshaft pulley on.
Application:Part #: 1105253RD
This is a crank pulley for an upright motor.
Application:Part #: 111105235A
These are the shims that set the endplay of the distributor drive gear.
Application:
These flywheels have been reconditioned and are sold on an exchange basis. Currently out of stock of cores. MUST send core before we can ship flywheel.
