Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a crank pulley for an upright motor.
This is a crank pulley for an upright motor. The pulleys are marked in degrees to assist in timing and valve adjustment. Besides that, they just look cool! Unless you like spending money on rebuilding your motor, NEVER, EVER use a power pulley on your Bug unless this is a drag car or all out race motor. Power pulleys turn the fan slower, which means less cooling and more heat. Neither are good for an air-cooled daily driver motor. These pulleys fit upright motors only.
No customer reviews for the moment.
Part #: 1105297
This washer is larger in diameter than stock so it gives you more surface coverage over the dowel pins.
Application:Part #: 113105219
Crankshaft Spacer Ring
Application:Part #: 311105273ACO
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: 111105259
The bolt and washer that holds the crankshaft pulley on.
Application:Part #: 111105285
Flywheel Shim 25-36HP, .32mm (0.0125")
Application:Part #: 1105305R
This is a large thrust surfaced gland nut made out of chromoly.
Application:Part #: 111105283
Flywheel Shim 25-36HP, .30mm (0.012")
Application:Part #: 111105213
This key goes into the crank to align the steel cam gear with the brass distributor drive gear.
Application:Part #: 1105254BK
This is a crank pulley for an upright motor.
Application:Part #: 113105701
These are the shells that go in the rods and ride on the crank.
Application:Part #: 111105287
Flywheel Shim 25-36HP, .34mm (0.0135")
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 111198511OS2
Main Bearing Set 1200-1600
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 1105169
These cranks are made from stock German core cranks.
Application:Part #: 311105273AN
VW Flywheel, 200mm 12 volt 15-1600cc Engines
Application:
This is a crank pulley for an upright motor.
