Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are new Brazilian tanks.
These are new Brazilian tanks. There are four 13mm headed bolts holding it. Make sure you are using German fuel line when putting it back in. The 61-67 tanks take a different cap, which is the same as a 68- one. Caps are separate. For Buses, you will need to have the motor out. Trucks, the tank is in the bed. It is a good idea to buy a neck collar when replacing a tank. NOTE: Disconnect the battery when replacing the tank.
Bug (Type 1): 61-67
Ghia (Type 4): 61-67
Race/Off-Road: 61-67
No customer reviews for the moment.
Part #: 111919051
Fuel Tank Sending Unit
Application:Part #: 133201181
Breather Hose
Application:Part #: 111209021F
This pipe comes out of the bottom of your gas tank.
Application:Part #: 133201075F
These are new Brazilian tanks.
Application:Part #: 111209167A
Reserve Lever for Fuel Tap
Application:Part #: 113919133
The sending unit registers the fuel level on the gauge.
Application:Part #: 111201551
Gas Cap, 100mm with Gasket
Application:Part #: 141201122
Gas Tank Breather Tube Sleeve
Application:Part #: 343201551C
Locking Gas Cap
Application:Part #: 111209113A
Fuel Tap Rebuild Kit
Application:Part #: 113201557E
Gas cap gasket
Application:Part #: 113919131A
The sending unit registers the fuel level on the gauge. This is the seal that goes around that sending unit
Application:Part #: 111201621C
Tank to Body Foam Seal
Application:Part #: 111809931
Fuel Filler Door Spring
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 111809905D
Fuel Filler Door
Application:
These are new Brazilian tanks.