Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The sending unit registers the fuel level on the gauge. This is the seal that goes around that sending unit
The sending unit registers the fuel level on the gauge. There were two types, mechanical for Bugs up to 1967 and electrical for Bugs 1968 and on. There is no such thing as 6v or 12v electrical sending units, as they have a floating ground. Before replacing the electrical unit, take the wire off of it and hold it to ground (a bolt or metal on the body). CAUTION: WHENEVER WORKING AROUND LIVE WIRES AND GAS BE VERY, VERY CAREFUL. Turn the key on. If the gauge goes to full, the sending unit is bad. If it doesn't, the gauge and or the vibrator is bad.
No customer reviews for the moment.
Part #: 111209189A
This grommet goes around the fuel line to protect it from getting cut (due to vibrations) where it comes out of the tunnel through the pan.
Application:Part #: 133201181
Breather Hose
Application:Part #: 211201557A
Cork Gas Cap Gasket, fits 60mm fuel caps
Application:Part #: 111209113A
Fuel Tap Rebuild Kit
Application:Part #: 113201075ABX
These are new Brazilian tanks.
Application:Part #: 133201181A
Fuel Elbow, "T" to Main Exit
Application:Part #: 113201621
This is the packing that goes around the gas tank opening, sealing off air and dirt from entering the trunk.
Application:Part #: 343201551C
Locking Gas Cap
Application:Part #: 111201557C
80mm Gas Cap Gasket
Application:Part #: 133133511
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
Application:Part #: N203631
Vent Hose, Filler to T, 14mm x 215mm
Application:Part #: 111209147A
This tube like screen is located in the bottom of the gas tank.
Application:Part #: 111209175B
Grommet for Reserve Lever
Application:Part #: 113919049D
The sending unit registers the fuel level on the gauge.
Application:
The sending unit registers the fuel level on the gauge. This is the seal that goes around that sending unit