Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Gas Cap Gasket, 100mm
Gas Cap Gasket, 100mm
Bug (Type 1): -55
Bus (Type 2): -55
No customer reviews for the moment.
Part #: 211845121
This seal goes around the front window.
Application:Part #: 1411300AL
These heavy duty sway bars help eliminate swaying.
Application:Part #: 6857639
Weld on Dash Grab Handle. Chrome Finish
Application:Part #: 6501203
19 1/4" Axles for Type 2 trans with 930 joints
Application:Part #: 111945117A
This seal goes between the tail light housing and the body of the car..
Application:Part #: 211801404DJ
This is a section of ther rear cargo floor.
Application:Part #: 141857071A
These are the padded dashes that came on the 1968 and later Bugs.
Application:Part #: 111837629
This seal goes on the back side of the front door vent wing.
Application:Part #: 211415801D
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 113821022P
These new front fenders are not as thick as the original German fenders.
Application:Part #: 151867505
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 6501205SW
These plates are .250" thick, that means they can handle the abuse of off roading.
Application:Part #: 111945231
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: 1301147
Solid Trans Mid Mount
Application:Part #: 221847213R
This triangular spacer plate goes between your welded plate and the screws.
Application:Part #: 1109337
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:
Gas Cap Gasket, 100mm
