Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are new Brazilian tanks.
These are new Brazilian tanks. There are four 13mm headed bolts holding it. Make sure you are using German fuel line when putting it back in. The 61-67 tanks take a different cap, which is the same as a 68- one. Caps are separate. For Buses, you will need to have the motor out. Trucks, the tank is in the bed. It is a good idea to buy a neck collar when replacing a tank. NOTE: Disconnect the battery when replacing the tank.
Bus (Type 2): 55-67
No customer reviews for the moment.
Part #: N203761
Tank Breather Hose 10mm ID, per foot
Application:Part #: 111201557B
Gas Cap Gasket, 100mm
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 803201511E
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
Application:Part #: 251919051E
The sending unit registers the fuel level on the gauge.
Application:Part #: 111201551AL
Locking Gas Cap
Application:Part #: 211201521A
Truck Hard Fuel line Tank to Motor
Application:Part #: 211919051
The sending unit registers the fuel level on the gauge.
Application:Part #: 113919131A
The sending unit registers the fuel level on the gauge. This is the seal that goes around that sending unit
Application:Part #: 211201195
Gas Tank to Body Seal
Application:Part #: 211209021A
Fuel Tap, with removable base
Application:Part #: 211201557F
Gas Cap Gasket
Application:Part #: 113919133
The sending unit registers the fuel level on the gauge.
Application:Part #: 111209139
Sealing Ring, Seals Copper Screen to Fuel Valve
Application:Part #: 211201119
This is part of the filler neck..
Application:Part #: 343201551
The most common reason, for replacing a cap is forgetting to put it back on at the gas station. Cap you get might not look like the one in the picture.
Application:
These are new Brazilian tanks.