Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This pipe comes out of the bottom of your gas tank.
This pipe comes out of the bottom of your gas tank. If you look at it, you'll see it actually sticks up into the tank. It's designed this way to prevent gas from being drawn off the bottom of the tank and to keep rust or rocks from plugging the pipe. Note: While you have the tap off, check the screen. If you don't have a screen, it's a good idea to buy one.
Bus (Type 2): 55-61
No customer reviews for the moment.
Part #: 211201195
Gas Tank to Body Seal
Application:Part #: 211201521B
Truck Hard Fuel line Tank to Motor
Application:Part #: 271919051B
The sending unit registers the fuel level on the gauge. 7 1/2" long
Application:Part #: 211201125
Fuel Tank Filler Hose
Application:Part #: 211201557A
Cork Gas Cap Gasket, fits 60mm fuel caps
Application:Part #: N203631
Vent Hose, Filler to T, 14mm x 215mm
Application:Part #: 211201055B
These are new Brazilian tanks.
Application:Part #: 211201125D
Fuel Tank Filler Hose, Curved
Application:Part #: 111209147A
This tube like screen is located in the bottom of the gas tank.
Application:Part #: 343201551C
Locking Gas Cap
Application:Part #: 261827600
Gas Door Hardware Kit
Application:Part #: 261201651
Fuel Tank Mounting Strap, Set of 2
Application:Part #: 113919131A
The sending unit registers the fuel level on the gauge. This is the seal that goes around that sending unit
Application:Part #: 111201557B
Gas Cap Gasket, 100mm
Application:Part #: 133133511
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
Application:
This pipe comes out of the bottom of your gas tank.