Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The sending unit registers the fuel level on the gauge.
The sending unit registers the fuel level on the gauge. There were two types, mechanical for Bugs up to 1967 and electrical for Bugs 1968 and on. There is no such thing as 6v or 12v electrical sending units, as they have a floating ground. Before replacing the electrical unit, take the wire off of it and hold it to ground (a bolt or metal on the body). CAUTION: WHENEVER WORKING AROUND LIVE WIRES AND GAS BE VERY, VERY CAREFUL. Turn the key on. If the gauge goes to full, the sending unit is bad. If it doesn't, the gauge and or the vibrator is bad.
Bus (Type 2): 68-72
No customer reviews for the moment.
Part #: 251201551C
The most common reason, for replacing a cap is forgetting to put it back on at the gas station.
Application:Part #: 111209113A
Fuel Tap Rebuild Kit
Application:Part #: 211201131D
Fuel Filler Retaining Ring
Application:Part #: 211209021A
Fuel Tap, with removable base
Application:Part #: 133133511
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
Application:Part #: 211201105
Fuel Tank Sending Unit Block Off Plate
Application:Part #: 211201557E
Gas Cap Gasket, 70mm
Application:Part #: 113919131A
The sending unit registers the fuel level on the gauge. This is the seal that goes around that sending unit
Application:Part #: 211201551R
Gas Cap Locking, includes gasket
Application:Part #: 211201075M
Fuel Tank. This tank can be used with non fuel injected busses, you just need to plug the injection return line.
Application:Part #: N203761
Tank Breather Hose 10mm ID, per foot
Application:Part #: 111209147A
This tube like screen is located in the bottom of the gas tank.
Application:Part #: 343201551C
Locking Gas Cap
Application:Part #: 131298221
This pipe comes out of the bottom of your gas tank.
Application:
The sending unit registers the fuel level on the gauge.