Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These panels go in the dash so you can install gauges.
These panels go in the dash so you can install gauges. You'll have to trim some metal behind the panel in order to put your gauges in.
Bug (Type 1): 58-
Race/Off-Road: 58-
No customer reviews for the moment.
Part #: 113863010
These are the interior panels.
Application:Part #: N113672
Bus Sliding Door Latch Plate Screws, Set of 8
Application:Part #: 117877223C
These are all of the parts that we can get our hands on for metal sunroof bugs.
Application:Part #: 111941115HVN
Vintage Euro Style Headlight Lens
Application:Part #: 113867506
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 1101485
Replacement Valve Cover Gaskets for Bugpack Angle Flow Heads (Cork)
Application:Part #: 111117021ERB
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 111937555D
This is a replacement fuse box.
Application:Part #: 113853505G
This is the front strip that goes down the front hood.
Application:Part #: 1117699
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:Part #: 221847219
This triangular plate is welded to your bus to allow you to screw in your pop-out window latch.
Application:Part #: 1101131B
A case saver is an insert that repairs worn or stripped head stud holes in a case.
Application:Part #: 251957809B
This cable goes from the speedo to the driver side front wheel.
Application:Part #: 111943131B
License Light Lens Seal
Application:Part #: 311198069MF
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers. MAHLE FORGED
Application:
These panels go in the dash so you can install gauges.
