Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Baja rear scoop
This is the rear fiberglass piece on a baja bug. These are made with a chopper gun then hand laid on the inside. Good quality.
No customer reviews for the moment.
Part #: 1141027
Kennedy Stage 3 Pressure plate 2600 LB
Application:Part #: 131611781
These are the metal brake lines found throughout the car.
Application:Part #: 1711104
The aftermarket shifters listed here, shorten the shift pattern considerably.
Application:Part #: 113957809A
This cable goes from the speedo to the driver side front wheel.
Application:Part #: 1601058CAP
Replacement Center Cap for Rebel and Cosmo Rims including metal Retaining Clip
Application:Part #: 1129809K
Kadron Air Cleaner Base Gasket (Pair)
Application:Part #: 6881410AYL
These seats are better than the fiberglass, but still no where near as good as beard seats.
Application:Part #: 111857233AA
Radio Block Off Plate with chrome strip and clips
Application:Part #: 6415812B
Tapered Chromoly Bung, mainly used for fabricating Tie Rods on Offroad/Race Applications. Thread 3/4"-16 RH
Application:Part #: 111809085CD
Quarter Panel, Rear Portion, with Bumper Retainers, Left
Application:Part #: 2498211A
Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard. These spindles will give you the stock ride and give you that lowered stance. They are sold on an exchange basis and come with new king pins. They do NOT come with link pins, so look at yours to see if you need new ones. Most of the time you do not need new ones as...
Application:Part #: 211971028JC
Complete Wiring Harness
Application:Part #: 111831421DO2
These pins are in the door hinges. They are a real pain to get out, but we've found an air hammer works the best. Sometimes that doesn't even work, so have a case of penetrating oil on hand. It's better to repair the door hinges before you paint the car. The plug is a good idea to have as well, they easily plug into the top of the hinge pin.
Application:Part #: 021256251A
Gasket
Application:Part #: JC22210
Jaycee Billet Oil Cap with Breater #8 AN Fitting, Red
Application:Part #: 1905530VA
The points we get today, aren't what they used to be, so the Compufire is the best way to go.
Application:
Baja rear scoop