Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The most common reason, for replacing a cap is forgetting to put it back on at the gas station.
The most common reason, for replacing a cap is forgetting to put it back on at the gas station. Rags only work in Baja, Mexico.
Bus (Type 2): 80-92
No customer reviews for the moment.
Part #: 113919133
The sending unit registers the fuel level on the gauge.
Application:Part #: 343201551C
Locking Gas Cap
Application:Part #: 261829661
Gas Door Lock Seal
Application:Part #: 311971907
Turn Signal Switch Grommet for Type 1, fuel pump and backup harness grommet on late Type 2, and main harness through body early Type 2
Application:Part #: 211201557E
Gas Cap Gasket, 70mm
Application:Part #: 211201075M
Fuel Tank. This tank can be used with non fuel injected busses, you just need to plug the injection return line.
Application:Part #: 111209147A
This tube like screen is located in the bottom of the gas tank.
Application:Part #: 211201551GR
The most common reason, for replacing a cap is forgetting to put it back on at the gas station.
Application:Part #: N203631
Vent Hose, Filler to T, 14mm x 215mm
Application:Part #: 211201119
This is part of the filler neck..
Application:Part #: 113919131A
The sending unit registers the fuel level on the gauge. This is the seal that goes around that sending unit
Application:Part #: 133133511
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
Application:Part #: 211209021A
Fuel Tap, with removable base
Application:Part #: 211201521B
Truck Hard Fuel line Tank to Motor
Application:Part #: 211255463
Fuel Filler Hose, Hose Clamp
Application:
The most common reason, for replacing a cap is forgetting to put it back on at the gas station.