Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N141212
These are the latches that hold the popout frame out.
Application:Some of the more common nuts you might need.. Transmission Mount Nut
Some of the more common nuts you might need.
Bug (Type 1): Nose cone
Bus (Type 2): Nose cone
Type 3: Nose cone
Ghia (Type 4): Nose cone
Thing (Type 5): Nose cone
Race/Off-Road: Nose cone
No customer reviews for the moment.
Part #: 211598600
Lock Plate Kit for Reduction Boxes
Application:Part #: 111801042CX
Inner Rocker Panel Right side repair panel
Application:Part #: 251201075AE
Fuel Tank 50mm Filler with Plastic Fill Pipe
Application:Part #: 1611701E
Braided SS Brake Lines, 24", Pair
Application:Part #: 1501541
These control arm bushings on IRS control arms are a good way to stiffen up the flex that goes into the arms.
Application:Part #: 1109620
Dual Spring Shims, .060" 8 piece
Application:Part #: 211853321
The front door window rolls up and down between these two rubber seals.
Application:Part #: 211881403
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 211809101B
This is what everyone cut out in the 60's.
Application:Part #: 1601057CAPB
Replacement Bolts for Center Cap for Corsa, 5-Rib, and GT 5 Rims
Application:Part #: 113109335
These tubes go from the case to the heads to house the push rods.
Application:Part #: 113101353ECO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 113501811
Z-Bar Bushing, Equalizer Spring, each
Application:Part #: 211953051
Turn signal Bulb Holder, Front Bullet Type Blinker
Application: